Fastec Imaging’s HS Series high-speed camera is designed with the serious researcher in mind. Image access as well as storage and retrieval have been rethought in order to maximize utility and reduce cycle times.
Full high-definition (1920 x 1080) @ 2500fps,
the HS7 captures detailed scenes for
breathtaking slow-motion playback.
Use lower resolutions for technical work at
much higher frame rates.
Fastec Imaging’s HS Series high-speed camera is designed with the serious researcher in mind. Image access as well as storage and retrieval have been rethought in order to maximize utility and reduce cycle times.
Proven 12-bit CMOS sensor on a new high-performance platform utilizing the Fastec
Camera Controller for unrivaled access to
captured images!
2560 x 2048 @ 253fps streaming to 1TB SSD
512 x 306 @ 5000fps
Up to 29,000fps at smaller resolutions
The new FASTCAM NOVA R2 brings together unique CMOS image sensor technologies and extensive high-speed digital imaging expertise to provide a camera with the flexibility to be used in a wide variety of applications. The FASTCAM NOVA R2 offers 12-bit image recording rates up to 1,440fps at 4-megapixel image resolution. Recording rates to 2,560fps are available at 1920 x 1080 resolution, and recording rates to 100,000fps can be achieved through further reductions to image resolution.
M-VIT 4000 – ideally suited for space limited locations such as experienced in automotive onboard crash tests and military / defense tests. The compact camera features a very light sensitive 1280×800 pixel up to 4000 fps sensor. Comprehensive I/O functions packed in a very economical way make this camera ideal for on board automotive crash tests when speed requirements are higher.
The cameras are tested for 150g /11 msec all axis. The highly light sensitive sensor delivers crisp clear images. This range of quality engineered and solid built cameras is another milestone in AOS’ portfolio of self containing high speed cameras.
L-VIT – a series of ultra compact high resolution high speed cameras. L-VIT are a range of self-containing high speed cameras 1920 x 1080 at up to 2500 fps, ideal for on board automotive crash tests.
When it comes to high speed onboard crash tests this camera leaves no wish open. The L-VIT is tested for 150g /11 msec (all axis) and spikes of up to 200 G. The highly light sensitive sensor is embedded in a powerful electronic with comprehensive I/O functionality for easy and reliable integration to crash tests systems. Additionally IRIG-B synchronization is available.
L-VIT 1000 – ideally suited for space limited locations such as automotive onboard crash tests and military / defense tests. The compact camera features a very light sensitive 1920 x 1080 pixel up to 1000 fps sensor. Comprehensive I/O functions packed in a very economical way this camera is ideal for on board automotive crash tests.
The cameras are tested for 150g /11 msec all axis. The highly light sensitive sensor delivers crisp clear images. This range of quality engineered and solid built cameras is another milestone in AOS’ portfolio of self containing high speed cameras.
The Photron Crysta is a high-speed polarization camera for the two-dimensional analysis of birefringence measurements, film thickness analysis, and surface roughness inspection, and is a powerful tool to understand phenomena such as birefringence, retardation, stress and impact fracture mechanisms of materials and fluids.
COMPACT HIGH PERFORMANCE CAMERAS
The Victorem™ CoaXPress series is a broad range of compact industrial video cameras featuring high performance Sony CMOS image sensors and high-bandwidth CoaXPress video output. Several models are available with a variety of sensors to choose from, ensuring the right Victorem camera can be selected for each application. With resolutions ranging from 0.4MP to 20.5MP, and frame rates into the hundreds of frames per second, these powerful cameras are ideal for performance-driven applications such as volumetric video capture, machine vision and automated optical inspection.
PROMON U cameras connect directly to PC via USB3 without need for additional cabling. The camera comes with the powerful Imaging Studio V4 software for piloting the camera, recording, playback and export of sequences. Via the software the user can set the system to record into PC DRAM for seconds or setup a video stream directly to hard disk for minutes or even hours.
Depending on the model PROMON U cameras offer stunning data rates of e.g. PROMON U1000 1900 x1200 up to 150 frames/sec, 1920 x1080 up to 167 frames/sec and when reducing the resolution. The software allows parametrization of different operation modes ranging from taking a quick shot of a single event, capturing intermittent events to a complete 24/7 recording. Do not miss an event anymore!
PROMON U cameras connect directly to PC via USB3 without need for additional cabling. The camera comes with the powerful Imaging Studio V4 software for piloting the camera, recording, playback and export of sequences. Via the software the user can set the system to record into PC DRAM for seconds or setup a video stream directly to hard disk for minutes or even hours.
The PROMON SCOPE G3 Twin System offers you a complete new tool to troubleshoot a production line where cause and effect are not at the same place – with the two synchronized camera heads. With the built-in and replaceable Li-ion battery pack, the PROMON SCOPE G3 slow motion production analysis camera will operate up to 1.5h with two and up to 3.5h with one camera head without recharging. Its high capacity solid state disk system records sequences for 40 minutes with option to extend up to 80 minutes. This slow motion industrial camera system is complete with controller and camera and weigh just is just under 2.9 kg (6.4lbs). PROMON SCOPE G3 is the ideal industrial high speed camera system to temporarily monitor industrial processes for troubleshooting, setup- and fine tuning, as wells as preventive maintenance tasks. The control unit of this slow motion camera system is a mobile, compact yet rugged device with a built-in touchscreen display for piloting the recording, playback in slow motion. The is available in color, monochrome or NIR (near infrared).
X-TREME is a camera for use under the toughest environmental conditions.
This fully enclosed high speed camera system is especially equipped with functionality used in UCAV (unmanned combat aerial vehicle), airborne store separation tests and defence testing application where heat, water and shock and vibration are present. The MIL 810 / DO 160 tested camera was developed for application where e.g. on-line image data transfer in normal video speed via an on board telemetry system to ground station is imminent while the camera records events in high speed and stores it inside the camera.
A modular high speed camera for budget critical applications
The M-PRI series starts from 1000 fps up to 4000 fps at full resolution. Different memory options for an exactly shaped high speed recording system to meet technical demands and budget.
With its 1920 x 1080 pixels and up to 2800 frames per second this high speed camera leaves no wish open in regards of resolution and framing speed.
The different camera models are available with basic memory of 4GB and can expand up to 128GB. The L-PRI is a solid build high speed camera with a high light sensitive state of the art sensor.
THE MIL 461 (EMI) and MIL 810 / DO160 (environment) certified controller accepts up to 4 H-EM high speed streaming cameras for direct-to-disk recording.
The AOS ASTREC-4 for high speed streaming controller takes performance to a new level. The ideal streaming controller for use on-board fixed wing and rotary wing aircrafts supports up to 4 H-EM high speed streaming cameras for direct-to-disk recording for minutes or even hours. The controller operates fan less and is embedded in solid aluminum housing, ready for harsh environments. Multiple I/O features are ready for easy synchronization with the test environment.
This system consisting of one up to four high speed cameras connected to an airborne controller, able to stream image sequences to flash disks for hours. Camera systems like the H-EM designed for airborne applications need an ultra-solid design and a structure to withstand the harsh environmental conditions of flight. This system can meet the big challenge of immunity to shock, vibration, changes of temperature and moisture.
H-EM is THE solution for long time high speed recordings for aircraft and component testing.